Garage door maintenance is frequently neglected. However, Orlando Locksmiths experts think a twice a year inspection and support needs to be a part of your routine.

Neglected garage doors can put a great deal of stress on an automatic garage door opener. So taking some time from your schedule to do a checkup twice a year could spare you some cash on fixes later-on.

Sy King Locksmith in Orlando experts will show you a straightforward seven-step routine that you can follow to stay up to date with your garage door:


Listen to the noises the garage door makes

house with blue garage door


Issues with your garage door and automatic opener are frequently transmitted by erratic movement, grinding or scratching sounds. A very much kept up, all around tuned garage door is a quiet piece of artwork that climbs up and down without any problems. Make sure to look at both sides of the system; for example, the springs, pulleys, and cables—ensure they look symmetrical.


Clear the tracks and fix the hardware


Check the tracks on both sides of the door to ensure they are free of debris and rust. Also, you could utilize a level to guarantee the tracks are straight on their vertical sections. You can make small changes; however, significant track adjustment should be left for professionals.

Most garage doors climb up and down many times a year, the movement and vibration can loosen up hardware. Look at the bracket holding the entryway tracks to and the garage door opener unit to the framing, and utilize a wrench to take care of any free bolts and screws.


Assess the rollers

The perfect house with garage doors

The rollers along the edge of the garage door need assessment two times per year and replaced at least every five years. Amid your assessment, replace any rollers you find that are cracked, chipped, and, worn. Except for the bottom rollers that are connected to cables, the other rollers can get changed by removing the brackets holding them.

Check the pulleys and cables


Check the state of the cables and pulleys on extension spring openers that attach the springs to the entryway. Most garage door specialists recommend that homeowners shouldn’t fix cables and springs. Since these high-pressure parts could cause accidents or even death.

However, a thing a homeowner could do is check for broken strands on the cables and damage close to the bottom roller bracket. Call an expert if you see any issues!


Lubricate parts

Garage oil spray can

Keeping the moving parts all lubricated will lessen the stress on the rollers and garage door opener and extend their durability. About two times every year, apply lubricant, for example, WD-40, on the rollers and hinges. Then wipe the parts dry and use a light 3-in-1 oil.

Furthermore, lubricate the pulleys on extension spring openers and the bearings on torsion-spring openers. Add some oil on the torsion spring if it looks corroded. If the garage opener has a metal chain or screw, spread white lithium grease on the opener’s chain or screw. However, don’t utilize oil on a belt-drive opener.


Asses the auto-reverse features


Automatic garage openers need to have an auto-reverse feature that stops and reverses the direction of the entryway when it hits an object or person before it reaches the ground. Often, the system works mechanically, or by a pair of photo-eye sensors on both sides of the entryway. Asses the mechanical kind by setting a board on the ground in the way of the entryway.

When the entryway descends and contacts the board, it should reverse direction and start to back up again. To examine the photoelectric system, begin your door slide in a closing direction, then pass your leg or a piece of 2×4 in the entryway’s way. The entryway should turn around and head upward. Remember, if there any issues, please contact a professional to fix it right away.